High-speed, made-in-India printing for fashion, garment and home textile production
Key Specification
Advanced industrial textile printing technology designed to maximize productivity, ensure superior color accuracy, and support diverse fabric applications.
Print Heads
24× Ricoh Gen 6 Industrial
Max Output
Up to 250 lm/hr
Max Resolution
600 × 900 dpi
Ink Colors
8 (C + M + Y + K + O + R + B + G)
Standard Speed
Up to 150 lm/hr
Max Print Width
1850 mm
Ink Types
Reactive · Acid · Disperse
Fabrics
Cotton · Linen · Silk · Nylon · Polyester · Blends
Printing Mode
Single / Bi-directional
Ink Tank Capacity
15 Litres
Software
neoStampa
Max Blanket Width
1900 mm
Max Media Width
1800 mm
Material Weight
30–450 gsm
Max Roll Diameter
400 mm
Max Roll Weight
200 kg
FabPro 2i is a direct-to-fabric printing machine built for high-volume fashion, garment, and home textile manufacturers. Made in India with Ricoh Gen 6 industrial printheads and an 8-colour ink setup, it prints vibrant designs directly onto fabric at up to 250 linear metres an hour, with automatic maintenance and head crash protection for uninterrupted production.
Direct to fabric printing needs preparation before printing and finishing after it. The exact steps depend on the fabric and the ink.
Before printing: fabric is pretreated so the ink fixes properly and prints sharply. FabPro 2i handles fabrics from 30 to 450 gsm.
After printing:
Fabric
Ink
Finishing
Cotton, linen
Ink: Reactive
Finishing: Steaming, then washing
Silk
Ink: Reactive or acid
Finishing: Steaming, then washing
Nylon
Ink: Acid
Finishing: Steaming, then washing
Polyester
Ink: Disperse
Finishing: Heat fixation
Blends
Ink: Based on the main fibre
Finishing: As per ink type
FabPro 2i has two speed figures: up to 150 lm/hr standard and up to 250 lm/hr maximum.
Speed
Per Hour
8-Hour Shift
24 Hours
Standard
Per Hour: 150 lm
8-Hour Shift: 1,200 lm
24 Hours: 3,600 lm
Maximum
Per Hour: 250 lm
8-Hour Shift: 2,000 lm
24 Hours: 6,000 lm
Maximum speed is best for bi-directional printing on lighter designs where speed matters most. Standard speed is the everyday production setting, balancing speed with print quality. Single-direction printing, dense fabrics and dark, full-coverage designs all slow output further. Real daily output also depends on roll changes, design changes and maintenance time.
FabPro 2i takes fabric rolls up to 400 mm in diameter and 200 kg, runs on neoStampa RIP software and holds 15 litres of ink.
Before installation, plan for:
Floor space for the machine, fabric feeding and collection, and roll storage
Stable power with voltage stabilisation and backup
Pretreatment equipment before printing
Finishing equipment: a steamer and washer for reactive and acid inks, or heat fixation for disperse
Operator training, which Orange O Tec provides at installation
Our team shares exact dimensions and power requirements during site planning.
On long runs, quality problems usually come from three sources: colour drift, nozzle dropouts and fabric problems. FabPro 2i is designed to address all three. Its uninterrupted ink supply keeps ink flow steady, so colour stays consistent across the full fabric width from the first metre to the last. Automatic capping and wiping keep nozzles clean between jobs. Sensor-based head crash protection stops fabric obstructions from damaging heads mid-run.
On the floor, operators should check nozzles at the start of every shift and compare printed colour against an approved sample at regular intervals.
FabPro 2i protects its Ricoh Gen 6 printheads in three ways:
Sensor-based head crash protection detects raised fabric or obstructions before they hit the heads
Automatic capping seals the heads when idle so ink doesn’t dry in the nozzles
Automatic wiping cleans the nozzle plates to keep printing sharp
For routine maintenance, run a nozzle check every shift, clean the heads when nozzles drop out, keep the print blanket clean and keep the ink tank topped up.
A direct to fabric printing machine prints designs straight onto fabric from a digital file, without transfer paper or screens. FabPro 2i prints on cotton, linen, silk, nylon, polyester and blends.
FabPro 2i prints up to 150 lm/hr at standard speed and up to 250 lm/hr at maximum speed.
FabPro 2i is built for higher volumes. It prints up to 250 lm/hr, compared with up to 110 lm/hr on FabPro 1i.
It uses reactive, acid and disperse inks with an 8-colour setup: C, M, Y, K, Orange, Red, Blue and Green.
Yes. FabPro 2i is made in India.
You’ll need pretreatment equipment, plus a steamer and washer for reactive and acid inks, or heat fixation for disperse ink.
Yes. Our team handles installation and operator training, and Orange O Tec’s 85+ service engineers provide after-sales support across India.
Resources
Access product videos, brochures, and technical information to explore the full capabilities of printers
Product Brochure
Full technical specifications, engineering details, installation requirements, and component overview for the FabPro 2i.
Download BrochureTalk to our team
Ready to unlock
Our specialists help you pick the right resolution, ink type, and configuration for your fabric range.
Call us directly
+91 74900 43336
